Expected nucleation effects of carboxylic acid salts onpoly(1-butene)
محل انتشار: فصلنامه پلی اولفین ها، دوره: 3، شماره: 1
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 389
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_POJ-3-1_002
تاریخ نمایه سازی: 12 تیر 1396
چکیده مقاله:
9,10-Dihydro-9,10-ethano-anthracene-11,12-dicarboxylic acid disodium salt (DHEAS) was synthesized and used as a nucleating agent for poly(1-butene) (iPB). The isothermal crystallization kinetics of iPB havingdifferent nucleating agents were investigated by differential scanning calorimetry (DSC) and polarized opticalmicroscopy (POM). The results showed that the nucleating agents increased the crystallization temperature and thecrystallization rate and shortened the crystallization half-time (t1/2). As well, the nucleating agents could be usedas heterogeneous nuclei in the iPB matrix and decreased the size of iPB. When the nucleating agent was DHEAS,the crystallization temperature of iPB was up to 93.6°C which was higher than that of other nucleating agentsfor iPB and pure iPB. The crystallization half-time in the presence of DHEAS was 0.58 min which was less thanthat of other nucleating agents for iPB and pure iPB. In this case, the spherulitic size of iPB was the smallest andthe morphology was changed, which indicated that DHEAS displayed better nucleation effect among the studiednucleating agents. Polyolefns J 3:37-45
کلیدواژه ها:
نویسندگان
Tao Zheng
College of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing ۱۰۰۰۴۹,China
Qian Li
Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Engineering Plastics, Institute ofChemistry, Chinese Academy of Sciences, Beijing ۱۰۰۱۹۰, China
Qian Zhou
College of Chemistry and Chemical Engineering, University of Chinese Academy of Sciences, Beijing ۱۰۰۰۴۹,China
Huayi Li
Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Engineering Plastics, Institute ofChemistry, Chinese Academy of Sciences, Beijing ۱۰۰۱۹۰, China