Modeling of geometry alteration effect on the performance of a solar chimney power plant (SCPP)
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 353
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NRIME03_039
تاریخ نمایه سازی: 19 خرداد 1396
چکیده مقاله:
In this paper a solar chimney power plant (SCPP) equipped with phase change materials (PCMs) with 10 mcollector diameter and 12 m chimney height were modeled in order to investigate the effect of geometry on the overallperformance and efficiency of the chimney. The sun radiation is simulated by a boundary heat source with the flux of700 W/m2 and the paraffin wax RT42 was used as a Latent Heat Storage (LHS) material at the bottom of the chimneyabsorber.It was observed that by the use of inclined Encapsulated Phase Change Materials (EPCMs) based on the latitudeangle of the location in the way that solar radiation is perpendicular to the absorber surface, enhances the air velocitythrough the chimney by 21.6% and it also improves the overall efficiency by enabling the system to continue workingduring night hours.It was also realized that by applying fillets to eliminate sharp edges at the chimney not only reduces stressconcentration caused by the wind power but it also distributes the air velocity over a broader area through the chimney.
کلیدواژه ها:
نویسندگان
Seyed Mostafa Mortazavi
Master Student in Energy Systems Engineering, University of Tehran
Hossein Yousefi
Assistant Professor, Faculty of New Sciences and Technologies, University of Tehran