Effect of Post-Warm Caliber Rolling (WCR) on ECAPed CP-Ti Grade2 Parts

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 501

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME013_073

تاریخ نمایه سازی: 19 خرداد 1396

چکیده مقاله:

Nowadays needs to materials with good strength and ductility simultaneously have become a drastic challenge. Also CP-Ti is an applicable material particularly for Aerospace and Bio fields. As-received CP-Ti represents relatively poor quality in terms of strength which can be addressed successfully by applying Equal Channel Angular Pressing (ECAP). The most important shortcoming is that the ECAP results in a slump in the ductility, hence the following forming processes encounter serious limitation in form of formability. In order to increase ductility and formability of the stated material, Warm Caliber Rolling (WCR) used after ECAP. As extracted by results from this study, specimens which underwent WCR show the uniform plastic deformation during passes. Also escalating workability of them is another advantage of post-WCR process

نویسندگان

Parham Rostami

University of Tehran, Master of Science Student

Ghader Faraji

University of Tehran, Assistant Professor

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • D JAVANROOD I, F., et al. (2012). "Designing of ECAP ...
  • WILIAM D On the mechanisms of ...
  • b i ocompatibility. Biomaterials 2008; 29: 2941-2953. ...
  • STOLY AROC VLADIMIR V, ZHU YUNTIAN T, LOWE TERRY C, ...
  • PARK, KYUNG -TAE, LEE, HANG-JAE, LEE, CHONG SOO, & SHIN, ...
  • IWAHASHI Y, WANG J, HORITA Z, ...
  • NEMOTO M, LANGDDON _ (1996). Severe plastic deformation by equal ...
  • ESTEBAN L, ELIZALDE M.R., OCANA I _ "Mechanical c haracterizati ...
  • ZHAO, XIC HENG , YANG, XIRONG, LIU, XIAOYAN, WANG, CHUAN ...
  • S TOLYAROV, V. V., ZEIPPER, L., MINGLER, B., & ZEH ...
  • _ _ J., BEZI, Z., & BARKAI, I. (2014). Manufacturing ...
  • MILNER, JUSTIN L., ABU -FARHA, FADI, BUNGET, CRISTINA, KURFESS, THOMAS, ...
  • Materials Science and Engineering: A, 561, 109-117. ...
  • S TOLYAROV, VLADIMIR V., ZHU, Y. THEODORE, A L EXANDROV, ...
  • نمایش کامل مراجع