Studying the Anticorrosion Performance of an Epoxy Coating Loaded with Different Mixtures of Zinc Aluminum Phosphate (ZPA) and Zinc Aluminum Polyphosphate (ZAPP) Pigments

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 364

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISPST10_091

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

The anticorrosion performance of the organic coatings can be improved using appropriate anticorrosive pigments. One way to obtain coating with a reliable anticorrosion performance isusing pigments which can release inhibitive substances. Zinc phosphate (ZP) is an example of these kinds of pigments.However, the anticorrosion performance of the ZP loaded coating is not high enough as its solubility and inhibitive properties is not good. In recent years, second (ZPA) and thirdgenerations (ZAPP) of zinc phosphate have been produced. These pigments are modified types of conventional ZPpigments which have higher solubility and anticorrosion efficiency. Second and third generations were introduced through physical and/or chemical modifications to improvetheir inhibitive performance. In previous works, the anticorrosion performance of the coatings loaded with ZPAand ZAPP were studied [1-4]. This work aims to investigate the effects of the mixtures of the pigments on the coating performance

نویسندگان

p MalekMohammadi.N

Polymer and Color Engineering Department, AmirKabir University of Technology, P.O. Box 15875-413, Tehran, Iran.

s.m Mousavifard

Polymer and Color Engineering Department, AmirKabir University of Technology, P.O. Box 15875-413, Tehran, Iran.

m.m attar

Polymer and Color Engineering Department, AmirKabir University of Technology, P.O. Box 15875-413, Tehran, Iran.

b Ramezanzadeh

Polymer and Color Engineering Department, AmirKabir University of Technology, P.O. Box 15875-413, Tehran, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Samples Blank ZP 100:0 80:20 60:40 40:60 20:80 0:100 _ ...
  • ISPST2012, Amirkabir University of Technology, Tehran, Iran, 21-25 October 2012 ...
  • M. Beiroa, A. Collazoa, M. Izquierdob, X. R. Novoab, C. ...
  • J. Sinko, Prog. Org. Coat. 42 (2001) 267. ...
  • R.Naderi, M.M.Attar, Prog. Org. Coat. 69 (2010) 392-395. ...
  • R.Naderi, M.M.Attar, Prog. Org. Coat. 66 (2009) 314-320. ...
  • نمایش کامل مراجع