Mechanical properties of Nd:YAG laser welding of SA508 Gr.4N Ni–Mo–Cr low alloy steel
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 372
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEICONF01_294
تاریخ نمایه سازی: 6 اردیبهشت 1396
چکیده مقاله:
Pulsed Nd:YAG laser welding of SA508 Gr.4N Ni–Mo–Cr low alloy low steel joint that is using in energy and gas turbine industries were studied. According to the results of metallographic image and the results of microhardness profile, hardness increase was observed in the fusion zone. Also, due to the high heat focus of laser process a very narrow heat affected zone with hardness as weld metal was observed. Results of microstructure and fracture surface were obtained by scanning electron microscopy. Because of the increased strength with fine martensitic microstructure very good connection quality has been created and fusion zone and HAZ unlike other welding methods is not disadvantage of joint. Due to high functionality of modern methods such as laser welding in comparison to traditional methods in reducing defects and problems related to the HAZ, in this study the mechanical properties of this joint is discussed.
کلیدواژه ها:
نویسندگان
Kiumars Ahmadpoor
M.S. student, Department of Metallurgy and Materials Engineering, University of Tehran
Seyed Ali Asghar Akbari Mousavi
Associate Professor, Department of Metallurgy and Materials Engineering, University of Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :