Numerical optimisation of a two-layered X-shape hydroforming joint by finite element and response surface methodology

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,837

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

AEROSPACE07_380

تاریخ نمایه سازی: 1 مرداد 1387

چکیده مقاله:

Tube hydroforming is an innovative metal forming Process by which many near net-shape industrial parts can be manufactured. Two-layer hydroformed parts, produced by this process, are appropriate for application in Oil and gas industry as well as aerospace. In this paper, the X-shape multi layer tube hydroforming process is simulated using the finite element method. A double-layer tube, outer layer brass and inner layer copper, was used initially to produce a composite hydroformed part. Different thickness setting for initial tube was suggested by design of experiment methodology. The suggested initial parts were later modeled and analyzed. Finally, response surface methodology (RSM) was adopted to plot results. Design parameters like, Weight, protrusion height, thickness reduction in protrusion region and thickness increase of produced part in central region were important to be controlled during production. Therefore, the initial thickness of layers was optimized in order to reach the best predefined product. All response surfaces were considered simultaneously during optimization to find the best optimum part possible which fulfilled all desired conditions. In order to verify the approximation, an initial tube with the optimum geometry was analyzed using FEM. At the end, both analyzed and predicted results were compared.

نویسندگان

D. Ghaffari Tari

MSc. Student, Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran

F. R. Biglari

Associate professor

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H.U. Licke, C.H.Hartl, T.Abbey., H ydroforming, Journual of Materials Processing ...
  • M.D. Islam, A.G. Olabi, M.S.J. Hashmi., Feasibility of multi-layered tubular ...
  • hydroforming and finite element simulation, Journal of Materials Processing Technology, ...
  • A. Boehm, C. hartl, _ Abbey, Process and tool technology ...
  • H. Naceur, Y.Q. Guo, S. Ben-Elechi., Response surface methodology for ...
  • Ali Mkaddem, Riadh Bahloul, Experimental and numerical optimization of the ...
  • G.H. Bae, J.H. Song, H. Huh, S.H. Kimb, S.H. Park, ...
  • Muammer Koc, Ted Allen, Suwat Jiratheranat, Taylan Altan, The use ...
  • D. _ Montgomery, G. C. Runger, N. F. Hubele, Engineering ...
  • نمایش کامل مراجع