U-Bending Analysis with an Emphasis on Influence of Hardening Models
محل انتشار: هفتمین همایش انجمن هوافضای ایران
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,850
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
AEROSPACE07_035
تاریخ نمایه سازی: 1 مرداد 1387
چکیده مقاله:
In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DPSteel, taking a benchmark of NUMISHEET'93 2-D draw bending, has been discussed. The simulation of the process is modeled using the finite element code, ABAQUS 6.5. For efficiency, the simulation of the U-bending process is modeled in the finite element program ABAQUSExplicit, while the springback analysis is simulated in ABAQUSStandard as it would take a long time to obtain a quasi-static solution of springback analysis in ABAQUSExplicit. Three hardening models are considered in simulations: isotropic hardening, pure (linear) kinematic hardening and combined (nonlinear kinematic) hardening. The influence of hardening models on predicting springback and final state variables such as equivalent plastic strain, sheet thickness and punch force has been studied. The combined hardening model predicted the springback parameters well and the isotropic hardening overpredicted the springack. The results of springback prediction have been compared with the results reported in the literature. A relation between the level of the final equivalent plastic strain and the amount of springback has been found. Results show that attaining higher amount of the equivalent plastic strain in the sheet leads to less springback after unloading. Comparison between the two materials demonstrates that the aluminum alloy requires lower punch force which means superior formability and exhibits smaller springback.
کلیدواژه ها:
U-bending - Finite element - Hardening models
نویسندگان
M Kadkhodayan
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Associate Professor,
I Zafarparandeh
MSc Student
M Tahani
Assistant Professor
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :