Three-phase flow modeling of oil, water and sand particles inoil transportation pipelines
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 614
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CHECONF03_242
تاریخ نمایه سازی: 14 آذر 1395
چکیده مقاله:
Sand deposition in oil transport pipelines can cause erosion of pipes and subsequently adverse effects on oil production. Presence of water cut along with the extracted oil rises the necessity of considering a multiphase flow problem. CFD can help one to understand and control behavior of such multiphase flow transport. Eulerian multiphase model was used to simulate hydrodynamics of oil, water and sand particles transport. Simulations were conducted using Ansys Fluent 15.0 software package. The aim of the present work was to investigate effects of variations of inlet velocity on the behavior of sand deposition in a 9.12 meter pipe length. It was concluded that providing an inlet velocity higher than 1.5m/s can decrease the deposition significantly
کلیدواژه ها:
نویسندگان
R Ranjbarnouri
Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
M Dadvar
Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
B Dabir
Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :