The effect of hemispherical chevrons angle, depth,and pitch on the convective heat transfer coefficient and pressure drop in compact plateheat exchangers
سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 830
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-4-1_004
تاریخ نمایه سازی: 28 شهریور 1395
چکیده مقاله:
Plate heat exchangers are widely used in industries due to their special characteristics, such as high thermal efficiency, small size, light weight,easy installation, maintenance, and cleaning. The purpose of this study is to consider the effect of depth, angle, and pitch of hemispheric Chevrons on the convective heat transfer coefficient and pressure drop. In the simulation of the heat exchanger, water and stainless steel arechosen for fluid and plate materials, respectively. The process is considered to be steady state, single-phase, and turbulent. In brief results show that the convective heat transfer coefficient and pressure drop decrease where the Chevrons depth and pitch increase. Moreover, these parameters enhance increment of the Chevrons angle up to 90°,after which they decrease with the Chevron angle. lastly, results are compared with Kumar equation which has been presented for corrugated plates. Maximum relative difference in this comparison is approximately 30%. As a result, a new correlation is proposed for theconvective heat transfer coefficient in terms of the Reynolds number and the plate geometry.
کلیدواژه ها:
نویسندگان
Behrang Sajadi
School of Mechanical Engineering,College of Engineering, University of Tehran, Tehran, Iran
Pedram Hanafizadeh
School of Mechanical Engineering,College of Engineering, University of Tehran, Tehran, Iran
Samar Bahman
School of Mechanical Engineering,College of Engineering, University of Tehran, Tehran, Iran
Ghazale Hayati
School of Mechanical Engineering,College of Engineering, University of Tehran, Tehran, Iran