RECOVERY OF MOLYBDENUM FROM FERROMOLYBDENUM FURNACE OUTGOING DUST
محل انتشار: همایش ملی مواد نو
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,155
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NEWMATERIALS01_197
تاریخ نمایه سازی: 31 فروردین 1387
چکیده مقاله:
Ammoniac leaching on ferromolybdenum furnace outgoing dust was investigated for recovery of molybdenum. By carrying out one leaching stage, the recovery of molybdenum was achieved about 78%; and the solution concentration obtaining from this process is approximately 30 g/L, a proper solution for derivation of molybdenum production. Empirical results show that the optimum Thermodynamics conditions for ammoniac leaching on ferromolybdenum furnace outgoing dust is obtained by employing the following orders: solid to liquid ratio, S/L, equal to 20/100, 7.5% ammoniac solution, T= 60°C and t=60min
کلیدواژه ها:
نویسندگان
M.H khodamorad
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology
E Keshavarz Alamdari
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology & Materials and Energy Research Center
D Darvishi
Materials and Energy Research Center
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :