Dynamic analysis of a one-stage gearbox system employing bondgraph approach
محل انتشار: سومین کنفرانس بین المللی علوم و مهندسی
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 650
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICESCON03_074
تاریخ نمایه سازی: 16 شهریور 1395
چکیده مقاله:
In this research dynamic analysis of a one-stage gearbox system was carried out utilizing bondgraph approach. The system under investigation is 8 degrees of freedom gearbox unit. In this system a crack was imposed to one of the spur gears with varying crack size. The proposed method is used to derive the governing equations of motions, which was appropriate for gear fault detection purpose. The status of the tooth deterioration can be evaluated mainly by introducing the reduction in the time-varying gear mesh stiffness. In order to get better insight into the fault status the mesh stiffness effects on the output dynamic response was considered. The governing equations of motion were implemented using block-oriented capabilities of MATLAB software to perform simulation study. As a result, the effects of mesh stiffness and crack size on the displacement of pinion were studied during practical conditions of operation.
کلیدواژه ها:
نویسندگان
ALI SELK GHAFARI
Sharif University of Technology, International Kish Campus, Kish Island, IRAN,
M. MOHSEN DELAVARI
Sharif University of Technology, International Kish Campus, Kish Island, IRAN,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :