MODELLING OF POLYETHYLENE PARTICLE SIZE DISTRIBUTION IN FLUIDIZEDBED REACTORS
محل انتشار: دومین کنفرانس بین المللی علوم و مهندسی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 612
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICESCON02_098
تاریخ نمایه سازی: 16 شهریور 1395
چکیده مقاله:
In the present study, a steady state population balance model was developed to predict the polymer particle size distribution (PSD) in ethylene gas phase fluidized bed olefin polymerization reactors. The multilayer polymeric flow model (MPFM) was used to calculate the growth rate of a single polymer particle under intra-heat and mass transfer resistance. The industrial plant data were used to calculate the growth rate of polymer particle and the polymer PSD. Numerical simulations carried out to describe the influence of effective monomer diffusion coefficient, polymerization rate and initial catalyst size on the catalyst particle growth and final polymer PSD. The results present that the intra-heat and mass limitation is important for the ethylene polymerization, the growth rate of particle and the polymer PSD in the fluidized bed reactor. The effect of the agglomeration on the PSD is also considered. The result presents that the polymer particle size distribution becomes broader as the agglomeration exits
کلیدواژه ها:
نویسندگان
Reza Marandi
National Petrochemical Compauny Research &Technology,Tehran Iran
H Shahrir
Polymer Engineering Department, Faculty of Chemical Engineering, University Technology Malaysia, Johor Bahru (JB), Malaysia
T Nejad Ghaffar Borhani
Process Systems Engineering Centre (PROSPECT), Chemical Engineering Department, Faculty of Chemical Engineering, University Technology Malaysia, Johor Bahru (JB), Malaysia