Effects of Particle Size Distribution Improvement and Dense Packing Technique on Compressive Strength of Oil Well Cement
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,013
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_363
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
In this paper, effects of particle size distribution improvement and dense packing technique on compressive strength of class G oil well cement have been investigated. It was observed that limited improvements in particle size distribution at about industrial possibilities can not result in a significant increase in 28- and 90-day compressive strength. Microsilica and limestone powder with grain size less than 45 micrometers can not be utilized as a substitute for cement for improving the compressive strength of class G oil well cement, because any addition of these materials will simultaneously result in shortening of setting times. Utilization of quartz powder, as an inert filler, and at optimum substitution percentages, i.e. around 6 to 10% by weight, however can result in almost 7% increase in 28-day compressive strength of hardened paste of cement without any considerable effect on setting times.
کلیدواژه ها:
نویسندگان
Ali Allahverdi
Department of Chemical Engineering, Iran University of Science and Technology, Iran
Ebrahim Najafi Kani
Department of Chemical Engineering, Iran University of Science and Technology, Iran
Shadi Soltani
Department of Chemical Engineering, Iran University of Science and Technology, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :