Direct synthesis of DME using a bifunctional catalyst: Type of reactor and catalyst performance
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,124
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_197
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
Syngas to dimethyl ether (DME) reactions are highly exothermic and the extent of catalyst temperature is very narrow, therefore temperature control has an excellent effect on synthesis. In this paper, a new bifunctional catalyst for DME synthesis was prepared and its activity was determined using a fixed-bed and a fluidized-bed reactor at constant pressure of 10 barg, mole ratio = 1.5 and the temperature varying from 230 to 300 ºC .The effect of reactors type on the performance of catalyst and DME synthesis were investigated. The experimental results showed that the catalytic activity and DME selectivity are higher in fluidized-bed than those in the fixed-bed reactors. Fluidized-bed reactor is, Therefore; an ideal candidate with respect to both heat and mass transfer processes.
کلیدواژه ها:
نویسندگان
Seyedeh Mahboobeh Hosseini
Chemical Engineering Department, Amirkabir University of Technology, Tehran, Iran
Morteza Sohrabi
Chemical Engineering Department, Amirkabir University of Technology, Tehran, Iran
Ali Kargari
Chemical Engineering Department, Amirkabir University of Technology, Tehran, Iran
Ali Ali Hadipour
Chemical Engineering Department, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :