Usage Special Truss Moment Frames For Lightweight in Building

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,761

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:


تاریخ نمایه سازی: 6 دی 1384

چکیده مقاله:

In this paper special truss moment frames for light weighting in construction was evaluated. STMF are intended to dissipate energy through flexural yielding of the chord members and axial yielding and buckling of the diagonal web members in the special segment. It is desirable to provide certain minimum shear strength in the special segment through flexural yielding of the chords members and limiting the axial force to a certain maximum value. Plastic analysis can be used to determine the required shear strength of the truss special segments under the factored earthquake load combination. Truss-girder moment frames have often been designed with littler regard for ductility. Research has shown that such truss moment frames have very poor hysteretic behavior with large, sudden reductions in strength and stiffness due to buckling and fracture of web members prior to early in the dissipation f energy through inelastic deformations. The resulting hysteretic degradation as illustrated results in excessively large story drifts in building frames subjected to earthquake ground motions with peak accelerations n the order of 0.4 g to 0.5g. This system recommend for using in region with earthquake hazard. The research work led to the development of special truss girders that limit inelastic deformations to a special segment of the truss. Extensive testing of full-scale subassemblies with story-high columns and full-span special truss girders has validated special Truss Moment Frames (STMF).

کلیدواژه ها:

Special Truss Moment Frames (STMF) ، lightweight


H.R. Vosoughifar

Assistance Professor of Civil Engineering Department, Azad University Tehran South Unit

M.R. Adlparvar

Assistance Professor of Railway Engineering Department

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Deng, Xiutai: Experimental study on the seismic behavior of frame-truss ...
  • Provisions for Structural Steel Buildings, American Institute of Seismic؛، [2] ...
  • Guidelines: Evaluation, Repair, Modification and Design of Interim؟، 267 [3] ...
  • Pincheira, J.A., Jirsa, J.O.: Seismic response of RC frames retrofitted ...
  • Easterling, S., Kim, W.M. (Ed): Composite construction in steel and ...
  • نمایش کامل مراجع