Optimization Of Directional Drilling By Non-Rotating Adjustable Stabilizer & sensor (NASS)
محل انتشار: کنفرانس بین المللی پژوهش در علوم و تکنولوژی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 555
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CRSTCONF01_170
تاریخ نمایه سازی: 27 اسفند 1394
چکیده مقاله:
The NASS/DS(Non-Rotating Adjustable Stabilizer & sensor/ Directional Solution) is the imitation of a physical process or an object by a directional drilling that causes a respond mathematically and graphically to data and changing conditions as though it were the process or object itself. This simulator NASS/DS controls curvature rate by precisely adjusting the radial extension of the stabilizer blades on a near bit Non-Rotating Stabilizer. The closed loop control process corrects for the secondary effects caused by formation characteristics, bit and tool wear, and manufacturing tolerances. The tool is designed to operate with any Measurement While Drilling and for Logging While Drilling product available in the industry.Tool will control curvature rates from 0 to 150/100 ft. in 81/2 inch holes with bit weights up to 55 ft
کلیدواژه ها:
نویسندگان
Eisa Noveiri
Materials Equipment &Movable, National Iranian South Oil Company,(NISOC)
Masoud Haghighi
Manager Offshore Drilling, National Iranian Drilling Company(NIDC)
Mohsen sheikhpor
National Iranian Drilling Company(NIDC)
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :