Retrofitting of existing steel frames using ductile bracing systems

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 663

فایل این مقاله در 21 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICESCON01_0503

تاریخ نمایه سازی: 25 بهمن 1394

چکیده مقاله:

Recent earthquakes indicate the importance of retrofitting existing structures to achieve an acceptable level of performance. Several different methods for retrofitting of existing structures were used by structural designers; Use of bracing systems is a cost-effective method for seismic retrofitting of existing steel frames. In particular, Buckling Restrained Braces (BRBs) and Special Concentrically Bracing systems (SCB) are workable choices to be used because of their large energy dissipation capacity especially under moderate to severe earthquakes. Buckling restrained braces yield in tension and compression, exhibits stable and predictable hysteretic behavior. By having focus on results for both ductile braces (SCBFs and BRBFs), It's observed that for both braces, earthquake energy dissipate by braces and all of plastic hinges are formed in braces and no hinges form is columns after retrofitting. Earthquake energy that dissipated by BRBFs are more than SCBFs. Also it is seen that for same column sections, design stress ratio in BRBFs is less than SCBFs and about braces, section areas in SCBF is more than BRBFs, where design ratios for braces in SCBFs is less than BRBFs.

کلیدواژه ها:

نویسندگان

Sarah Seyed Farizani

Sharif University of Technology, International Campus, Kish Island

Mohammad Taghi Kazemi

Sharif University of Technology, Tehran, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Prinz, S., 2002, "Effect of beam splicing on seismic response ...
  • ] Roeder, Ch. W., and Lumpkin, E. J., and Lehman, ...
  • Sabelli, R., and Lopez, W., 2004, "Design of _ uckl ...
  • Sabelli, R., , and Roeder, CH., and Jerome, H., 2013, ...
  • Sabelli, S., and mahin, S., and Chunho Chang., 2003, "Seismic ...
  • Uang, C.M., and Nakashima, M. 2003. "Steel buckl ing-restrained frames, ...
  • Uang, C.M., Bruneau, M., Whittaker, A. S., and K.C. Tsai, ...
  • نمایش کامل مراجع