The Effect of Al2O3 Nanoparticle Addition on the Coating Behavior of Al-based Suspensions in Producing Nanocomposite Hollow Spheres
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 325
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN05_436
تاریخ نمایه سازی: 30 آبان 1394
چکیده مقاله:
The present study carried out fluidized bed coating of Al‐based powder‐binder suspension onto a polymersubstrate. The effect of the nanoparticle additive and process time was investigated for coating process efficiency andcoating characteristics. It was found that efficiency decreased as the processing time increased, but the coatingthickness increased as the processing time and amount of binder increased. For a sample with 1.5 wt. % of binder, asthe nanoparticle content changes from 2.5 to 7.5 wt.%, the coating thickness decreases from 351 to 310 μm. This issueabout efficiency is 61.11% (for 2.5 wt. %) and 52.78% (for 7.5 wt. %).
کلیدواژه ها:
نویسندگان
M Amirian
Faculty of Materials Science and Engineering, K.N.Toosi University of Technology
H Khorsand
Faculty of Materials Science and Engineering, K.N.Toosi University of Technology