Numerical Study of Single Point Incremental Bimetal Sheet Forming
محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 497
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT04_106
تاریخ نمایه سازی: 22 مهر 1394
چکیده مقاله:
Single point incremental forming (SPIF) which does not require any high capacity press machine and a set ofdies with certain shape, is an emerging sheet metal forming technology, capable of manufacturing complex parts at low cost for small to medium-batch production. The usage, of bimetal sheets it is justified because of the addition of theadvantages offered by both materials of which it is composed and to a reduction of the disadvantages presented by each material if taken separately. Springback phenomenon has been mentioned as one of the important geometrical anddimensional aspects of sheet metal forming processes. In this paper, the SPIF of aluminum-steel bimetal sheet is investigated by means of a numerical approach for calculating springback. A Finite Element (FE) model has beendeveloped and validated by comparison with SPIF of aluminum sheet data measured during the process which published by others.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :