Evaluation of Fracture Properties of Acrylonitrile Butadiene StyrenePolymeric Material using Arcan Test Method under CombinedLoading Conditions
محل انتشار: چهارمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 603
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT04_095
تاریخ نمایه سازی: 22 مهر 1394
چکیده مقاله:
In this study the fracture behavior of ABS (Acrylonitrile butadiene styrene) polymeric material isinvestigated numerically and experimentally. Tests are performed with Arcan specimens. Testing with Arcan specimen gives the opportunity of utilizing just one kind of specimen for extracting fracture properties for modeI, mode II and different mixed mode ratios of materials with exerting load via different loading angles. Variation of loading angles in range of 0-90° made possible to achieve different mixed mode ratios. The test fixture andsample were modelled with ABAQUS/CAE and the contour integral method was used at various loading angles to calculate the non-dimensional stress intensity factors. Finally, applying the non-dimensional stress intensityfactors to critical loads obtained experimentally, critical fracture toughness of this type of polymer has been attained.
کلیدواژه ها:
نویسندگان
A. E Oskui
Postgraduate Student, Department of Mechanical Engineering, Sahand University of Technology, Tabriz, Iran.
N Choupani
Associate Professor, Department of Mechanical Engineering, Sahand University of Technology/ Institute of PolymericMaterials, Tabriz, ۵۱۳۳۵-۱۹۹۶, Iran.
M. S. Khamneh
Postgraduate Student, Department of Mechanical Engineering, Sahand University of Technology, Tabriz, Iran