Finite element simulation of thermal deformation in bi-stablecylindrical composite shells for morphing applications

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 538

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT04_016

تاریخ نمایه سازی: 22 مهر 1394

چکیده مقاله:

Bi-stable composite structures have received special interest in morphing technology because they can takelarge deformations with energy only needed for snapping from one stable configuration to the other and once the new configuration is reached the energy can be removed. Deformation of a cylindrical carbon/epoxy composite cross plyshell under thermal load in the form of temperature difference is simulated using finite element software ABAQUS. Static general analysis is used for simulations with enabled option for nonlinear geometry due to large displacements.To avoid numerical singularity, automatic stabilization which adds viscous forces to the global equilibrium equations is applied. Damping factor should be kept small to achieve accurate solutions. To avoid stability difficulties a static Riksanalysis is also performed for snap-through event and results are compared with static general analysis. The results of simulations are compared with results from literature and excellent agreement is obtained.

نویسندگان

S Mostafavi

PhD student, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran

M Golzar

Associate Professor, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran

A Alibeigloo

Associate Professor, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • _ Hyer, M. W., Jourmal of Composite Materials 15, pp. ...
  • . Peeters, L. J. B., Powell, P. C. and Warnet, ...
  • . Dano, M. and Hyer, M. W., mechanics of composite ...
  • . Ansari, M., Golzar, M., Kasaei, M. M., Ghabezi, P. ...
  • . Moore, M., Ziaei-Rad, S. and Firouzian-Nej ad, A., Jourmal ...
  • Solids and Structures 47, pp. 3412-3425, 2010. ...
  • . Pirrera, A., Avitabile, D. and Weaver, P. M., International ...
  • and the work of Pirrera et al. [10]. Both general ...
  • Finite element simulation of snap-thorough event in an [7]. _ ...
  • trough force and thus offes greater capability for analysis of ...
  • نمایش کامل مراجع