Plunge pool scour in prototype and laboratory
سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,509
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
HDRS_19
تاریخ نمایه سازی: 16 آذر 1384
چکیده مقاله:
Scour is a major concern with flip buckets in hydraulic engineering, given the several serious incidents over the past 50 years. The present research is based on previous laboratory observations conducted at VAW, ETH-Zurich, Switzerland, to explore the effect of cross-sectional jet shape, the effect of tailwater jet submergence and the jet impact angle on the plunge pool scour features. All observations were conducted in a sediment bed. It was observed that the maximum scour depth may be significantly larger for so-called dynamic flow conditions than for static conditions when the jet action has seized. This was attributed to large dynamic forces with a twofold effect: (1) Suspension of sediment by the highly turbulent flow, and (2) Steeper scour hole slopes as compared with the natural angle of repose. The following thus intends to relate the static end scour depth to the maximum dynamic scour depth in order to allow prediction of the effective scour maximum for prototype conditions
نویسندگان
Stefano Pagliara
Department of Civil Engineering, University of Pisa, Pisa, Italy
Willi H. Hager
VAW, ETH-Zentrum, Zurich, Switzerland
Hans-Erwin Minor
VAW, ETH-Zentrum, Zurich, Switzerland
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :