Hydroxynaphthalene formation and its application to resin preparation
محل انتشار: نخستین کنفرانس بین المللی نفت، گاز و پتروشیمی با رویکرد توسعه پایدار (ارتباط دانشگاه با صنعت)
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 701
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGPD01_147
تاریخ نمایه سازی: 1 مهر 1394
چکیده مقاله:
Polycyclic aromatic hydrocarbons (PAHs) are multi-ring compounds that are very common carcinogenic toxins in environment [1]. Major product of fossil fuel combustion and major component of crude oil contain PAHs. The most recycle able resources of poly aromatic hydrocarbons are creosote and burned oils. Creosote is a combination of 160 chemical ingredients, produce from coal tar distillation in high temperature operation and had been used many years for maintenance, preservation and enhancing durability of wood products against fungi, insects and marine borers. Creosote treated wood have been used in power transmission lines, rail way ties, post mines, and in construction duties; such as, wood bridges, structural elements, park convenience, fence, beach and harbor equipments and many other applications. The most containing of creosote components are naphthalene, flourene, phenanthrene anthracene and a little high molecular weight compounds like benzo a pyrene and benzo kflouranthene. These are environmental pollutant compounds and we are going to find their capabilities in recycling processes for the useful products. It seems these compounds can be enrolled in phenolic type resins. Resin production from phenol and formaldehyde has long been studied as a technique to utilize in petroleum based adhesives products. Phenol formaldehyde (PF) resin prices are closely related to the price of phenol, which is derived from petroleum, and its price has increased during the past decade. The increase in PF prices has led to research into alternative sources instead phenol as chemical feedstock. Formaldehyde did not react only with free phenol but also is liable to react with poly aromatic hydrocarbons having reactive sites of hydroxyl groups. Between methods to enrich poly aromatic hydrocarbons with the hydroxyl functional group, H2O2 is a commonly used hydroxyl radical precursor that can be broken down by various methods, thermolysis, photolysis, Fenton chemistry, etc. To generate hydroxyl radical, typically high temperatures or very intense UV radiation must be used [2]. As an alternative method for generating hydroxyl radical at low to moderate temperatures, azohydroperoxides have been in use since the early 20th century, and have a wide array of uses [3].Grant et al. in 1985 showed that hydroxyl radical can be formed in high yields using azohydroperoxide sources. In the presence of a radical trap, they have shown that up to 96% decomposition rate into hydroxyl radical is possible. The electrophilic nature of hydroxyl radical make it possible to react on aromatic compounds. Recent produced hydroxy aromtics are more reactive and can be used in lieu phenol. Produced components like other chemicals in unusual exposure dose into body influence as hazard and carcinogen chemicals so that environmental and health safety regulations should be regarded in their applications. Reaction of hydroxylated polyaromatic hydrocarbons and formaldehyde, without or in the presence of phenol is supposed to be a promising technique to molding appliance similar to commercial novolac or resole adhesives. Several studies have been reported on the substitution of phenol in PF resins with other materials, such as lignocellulosic biomass, lignin, tannin, and carbohydrates. Using the above described chemistry, we have investigated hydroxylated naphthalene potential as the simplest compound of reactive polycyclic aromatic hydrocarbons (PAHs) to offer new approaches for phenol replacement in PF resin formulation.
نویسندگان
Mohsen Sheikholeslami
Ph.D., Center of applied management of fast growing wooden species, Faculty of natural resources, University of Tehran.
Naser Mahmoud kalayeh
Chemical engineer, division of incorporated planning management, National Iranian oil Co
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :