Real Time Design and Implementation of Industrial Generelized Predictive Control on Two Semi-Industrial Processes
محل انتشار: پانزدهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 937
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC15_207
تاریخ نمایه سازی: 19 تیر 1394
چکیده مقاله:
In this paper a PLC-based industrial Generalized Predictive Control is presented for two semi-industrial processes with different behavior available in Shiraz University laboratory. The first process is a thermal plant with slow dynamic and the other is a fast tank level system with integral effect. Nowadays programmable logic controllers have found wide acceptance in industries due to their remarkable benefits. On the other hand, advanced control theories, which need powerful processors, are growing rapidly in academia. These techniques are not implementable in the existed PLCs in industries and this can result in a gap between industries and academia. Therefore searching new ways for implementing these advanced control methods and upgrading existed PLCs without spending much money is an important issue. In this paper an Industrial Generalized Predictive Control based on PLC-s7300 have been implemented for two processes, using fast programming techniques. A comparison between the this control technique and traditional PID controllers for the same PLC is also presented. Also, the results show the applicability of the mentioned method for the systems with both slow and fast dynamics
کلیدواژه ها:
Programmable Logic Controller (PLC) ، Generalized Predictive Controller (GPC) ، Industrial GPC (IGPC) ، Step 7 ، PID controller
نویسندگان
Reyhane Mokhtarname
Department of Power and Control Engineering, School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
Ali Akbar Safavi
Department of Power and Control Engineering, School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
Mohammad Ali Hassanpour
Department of Power and Control Engineering, School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
Mohammad Mehdi Arefi
Department of Power and Control Engineering, School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :