Exergy analysis and optimization of a solar driven Kalina cycle based on evolutionary algorithm
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 709
فایل این مقاله در 24 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ETEC04_435
تاریخ نمایه سازی: 19 تیر 1394
چکیده مقاله:
This paper presents detailed energy and exergy analyses of Kalina cycle integrated with parabolic trough solar collectors. Key exergetic parameters are examined: exergetic efficiency, exergy destruction rate, fuel depletion ratio, irreversibility ratio, and improvement potential. It is revealed that as the solar irradiation intensity increases, the energetic and exergetic efficiencies increase. Exergetic analysis shows that the main source of exergy destruction is the solar collectors in which more than 68% of solar inlet exergy is destructed. In addition, more than 15% of the inlet exergy is destructed in the evaporator. This study indicates that there is an exergetic improvement potential of 95% in the system considered. Also, a parametric analysis is conducted to examine the effects of some key thermodynamic parameters on the system performance. The system is also optimized with the exergy efficiency as an objective function by means of genetic algorithm under the given conditions. It is found that there exists an optimal turbine inlet pressure and evaporator pinch temperature difference under given conditions to maximize the energy and exergy efficiencies of system. The energy and exergy efficiencies are less sensitive to a change in the turbine outlet pressure. An optimal ammonia basic concentration and ammonia-water mass rate can be identified that yields maximum energy and exergy efficiencies. Finally, it is shown that system exergy efficiency improves from 5.41 to 8.20% under optimal conditions.
کلیدواژه ها:
نویسندگان
Fateme Ahmadi Boyaghchi
Assisstant Prof., Dep. of Mechanical Engineering, Faculty of Engineering, Alzahra University, Tehran, Iran,
Mahboobe Sabaghian
M.S. Student, Dep. of Mechanical engineering, Faculty of Engineering, Alzahra University, Tehran, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :