The Electronics Readout and Measurement of Parameters of a Monitor System
محل انتشار: سومین کنفرانس ملی ایده های نو در مهندسی برق
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 664
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCNIEE03_074
تاریخ نمایه سازی: 11 اردیبهشت 1394
چکیده مقاله:
In a protontherapy center one of the main issues is toassure the correct delivery of the dose to the patient. Thebeam has to be monitored in a non-invasive waydownstream of the spreading system and its position,shape and intensity have to be measured just before thetarget in order to feedback the relevant beam parametersto the upstream elements of the beam line.The electronics read-out for the beam monitor system isbased on an ASIC chip- TERA06, The integrated circuitas the current-to-frequency converter, built in 0CMOS technology, 64-channel wide dynamic rangecharge measurement at high converter frequency (20MHz), developed by the Torino medical physics group.The pedestal and quantum charge tests on the FrontEndTERA06 cards have been presented good results usefulto development of front-end electronics.
کلیدواژه ها:
نویسندگان
Abdolkazem Ansarinejad
Physics and Accelerators School, Nuclear Science and Technology Research Institute, Tehran
Roberto Cirio
Experimental Physics Department, University of Torino, Torino, Italy
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :