Comprehensive inspection of the Type C leak test of the Steel containment in WWER 1000 Nuclear Power Plants

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 723

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

SENACONF01_217

تاریخ نمایه سازی: 25 فروردین 1394

چکیده مقاله:

In WWER 1000 NPPs, leak tests of isolation valves are performed in accordance with testing procedures elaborated according to the design documentation for tests of individual groups of isolation valves. For each tested group of valves (or individual test of a valve), detailed procedures have been elaborated and evaluation criteria specified. Leak tests in general are performed using a unified method: the method of drop of pressure and temperature change measurement of gas in the volume between the valves, after pressurisation to a design pressure. A preliminary result of a type C test is satisfactory if the pressure drop in the tested volume does not exceed 3 kPa during a specified measurement period. The allowable leakage rate of the main personnel air lock established by the test of the air lock before the containment leakage rate test and converted to parameters of the containment leakage rate test is 25.000 Pa.m3s-1

کلیدواژه ها:

نویسندگان

Ali Haghighi Shad

MSc, University of Amirkabir Industrial Technology, Tehran

Heidar Abbasi

MSc, University of Applied Science and Technology of Khormuj, Chemical Engineering Department, Bushehr, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :