Oxidative Coupling of Methane by High-Frequency Pulse Plasma
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 699
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_388
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
In this study, oxidative coupling of methane(OCM)in pulse corona plasma reactor at atmospheric pressure and room temperature is investigated. Pulsed corona discharge is generated between 10 point, one plate electrode in a quartz tube. The effect of five parameters including molar ratio ofCH4/O2, feed flow rate, input voltage, gap distance and pulse frequency on methane conversion and C2 product selectivity and yield were also investigated. A statistical method of experimental design, Taguchi method, was applied to optimize process conditions. From the results of fourlevel Taguchi method(L16 array), we can conclude that maximum conversion and yield of C2product as 35.4% and 23.64% respectively was obtained at low level of CH4/O2 =4:1, flowrate=100ml/min, gap distance=7mm, high level voltage=18kv and pulse frequency=5000Hz. Maximum selectivity of C2 product was also obtained at highest acceptable level of this five parameters.
کلیدواژه ها:
Oxidative coupling of methane ، Pulse corona plasma ، Methane conversion ، Selectivity ، Yield of C2 product ، Taguchi method
نویسندگان
Mohammad Reza Omidkhah
Tehran Tarbiat Modares university ,Islamic Azad university South of Tehran branch
Abbas Roshanaei
Tehran Tarbiat Modares university ,Islamic Azad university South of Tehran branch
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :