Preparation of isotactic polypropylene microporous membranes via thermally induced phase separation (TIPS) method.
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 750
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_199
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
Isotactic polypropylene (iPP) microporous membranes were prepared via thermally induced phase separation (TIPS) method. IPP, paraffin oil and acetone were used as the polymer, diluent and extractant, respectively. The effects of polymer concentration and quenching bath temperature on the membrane porosity and mechanical properties were investigated. With the increase of polymer concentration, the porosity of membrane decreases and the tensile strength increases as well. When quenching at same coarsening time, the porosity obviously increases with the increase of bath temperature.
کلیدواژه ها:
Thermally induced phase separation ، membrane porosity ، tensile strength ، isotactic polypropylene ، paraffin oil
نویسندگان
Aref Dadgostar
Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran
Reza Yegani
Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran
Yoones Jafarzadeh
Faculty of Chemical Engineering, Sahand University of Technology, Tabriz, Iran . Membrane Technology Research Center, Sahand University of Technology, Tabriz, Iran