Nanofiller in aircraft and heavy vehicles tyre rubber compounds

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 983

فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCTCC03_045

تاریخ نمایه سازی: 10 شهریور 1393

چکیده مقاله:

Natural rubber is the main polymeric base of aircraft and heavy vehicles tyre rubbercompounds. The effect of the same amount of a silica nanofiller on the curing,mechanical and dynamic properties of natural rubber compounds was investigated.The silica surfaces were pre-treated with bis[3-triethoxysilylpropyl] tetrasulfide(TESPT) to chemically bond silica to rubber. The rubbers were primarily cured byusing sulfur in TESPT, and the cure was optimized by the addition of accelerator andactivator, which helped to form sulfur chemical bonds between the rubber and filler.Different amounts of accelerator and activator were needed to fully crosslink thefilled rubbers. The mechanical and dynamical properties of the vulcanizates improvedsubstantially by the incorporation of the filler in the rubber. This was due to high levelof rubber-filler adhesion and formation of chemical bonds between the rubber andTESPT.

نویسندگان

S Ostad Movahed

Faculty of Sciences, Ferdowsi University of Mashhad, Mashhad,Iran

A Ansarifar

Institute of Polymer Technology and Materials Engineering (Department of Materials)Loughborough University, Leicestershire, LE۱۱ ۳TU, UK

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Handbook; Carl Hanser Verlag, Munich, Germany, 1989. ...
  • Hair, M. L.; Hertl, W. J Phys Chem 1970, 74, ...
  • Standard 903 Part A3; London, UK, 1995. 22. Greensmith, H. ...
  • determin ation of tensile stress strain properties. British Standard 903 ...
  • of resistance to abrasion. British Standard 903: Part A9: Method ...
  • Polmanteer, K. E. Lentz, C. W. Rubber Chem Techol 1975, ...
  • Harmon, D. J.; Jacobs, H. L, J Appl Polym Sci ...
  • Pike, M.; Watson, W. F., J Polym Sci 1952, 9, ...
  • Ahagon, A. Rubber Chem Techol 1996, 69, 742. Wang ...
  • Chem.Technol 1998, 71, 521. ...
  • (0). Wolff S , Wang M J., Rubber Chem Technol.1992, ...
  • Hockley, J. A.; Pethica, B. A. Trans Faraday Soc 1961, ...
  • Wolff, S.; Gorl, U.; Wang, M. J.; wolff, W., Eur ...
  • Wolff, S. Rubber Chem Technol 1996, 69, 325. ...
  • Tan, E. H.; Wolff, S.; Haddeman, S. M.; Gretwatta, H. ...
  • . Dannenberg, E. M. , Rubber Chem Technol 1975, 48, ...
  • Thongsang, S.; S ombatsompop, N., Polymer Composites, 2006, 27, 30. ...
  • Parker, D. D.; KOENIC, J. L., Adhes 2000, 73, 299. ...
  • Ansarifar, A.; Azhar, A.; Song, M., J Rubber Res 2003, ...
  • Fries, H.; Pandit, R. R. Rubber Chem Technol 1982, 55, ...
  • Cochet, P.; Barruel, P.; Barriquand, L.; Grobert, Y.; Bomal, Y.; ...
  • British Standards Institution, Methods of testing raw rubber and unvulcanized ...
  • British Standards Institution, Methods of test for raw rubber and ...
  • British Standards Institution, Methods of test for raw rubber and ...
  • Wolff, S.; Wang, M.; Tan, E. H., Rubber Chem Techol ...
  • نمایش کامل مراجع