A VIKOR Optimization Approach Towards Predictive Torque Controller Design for Open-End Winding Induction Motors

سال انتشار: 1406
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 29

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ECE-4-1_004

تاریخ نمایه سازی: 22 آبان 1405

چکیده مقاله:

Predictive torque control (PTC) is known as a straightforward approach for induction motor drives for which the control parameters can be directly included in the criterion measure. Nevertheless, choosing the weight factors of the criterion measure is an important challenge. In conventional PTC methods, the criterion measure includes the torque and stator flux control objectives which have different weight factors for each control objective. Tuning weight factors empirically results in a complicated control process. To successfully cope with this issue, this paper suggests the VIKOR method for optimization of the criterion measure. In this research, a new PTC scheme has been proposed using the VIKOR optimization algorithm for the selection of inverter switching vectors connected to an open-end winding induction motor (OEWIM). The purpose of controlling the switching vectors is to reduce the flux and torque ripples. The results are then compared with the conventional PTC and ranking methods. It is demonstrated that, with optimization by the VIKOR method, the flux and torque ripples have been remarkably reduced in comparison with the existing approaches. The proposed VIKOR-based PTC reduces the flux ripple by ۷۸.۵% (from ۱.۴ Wb to ۰.۳ Wb) and reduces the torque ripple by ۵۸.۳% (from ۰.۰۱۲ N·m to ۰.۰۰۵ N·m) compared to the conventional PTC method. Finally, a step-by-step implementation algorithm is presented and simulated using MATLAB which demonstrates favorable results.

نویسندگان

- -

Department of Electrical Engineering, Faculty of Engineering, Arak University, Arak, Iran

- -

Department of Electrical Engineering, Faculty of Engineering, Arak University, Arak, Iran

- -

Department of Electrical Engineering, Faculty of Engineering, Arak University, Arak, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :