An Integrated FDM–GA Framework for Automated Back Analysis in Tunneling–Part II: Case Study and the Influence of Stress Relaxation Parameters

سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 27

فایل این مقاله در 23 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMAE-17-5_008

تاریخ نمایه سازی: 22 آبان 1405

چکیده مقاله:

In the companion Part I paper, an integrated Finite Difference Method–Genetic Algorithm (FDM–GA) framework was developed for automated tunnel back analysis, coupling numerical simulation with evolutionary optimization to estimate geotechnical parameters from field monitoring data. Part II demonstrates the application and validation of this framework through the back analysis of the Pardis Highway Tunnel, excavated within the Hezar Darreh conglomerate formation in northern Tehran, Iran. Three-point convergence measurements from ۲۴ monitoring stations were processed to derive representative reference displacements for calibration. Thirty independent FDM–GA optimization runs were performed to estimate the ground parameters, yielding narrow calibrated ranges for cohesion (c), friction angle (φ), Young's modulus (E), and the coefficient of lateral earth pressure at rest (K۰). A representative engineering parameter set was identified by integrating optimization results with inter-parameter correlations and geotechnical evidence from comparable tunnel projects. Unlike conventional tunnel back analysis studies that primarily emphasize parameter optimization, the proposed framework integrates optimization with geological interpretation to identify representative engineering parameter sets. It also systematically evaluates how stress relaxation assumptions influence parameter calibration and the engineering interpretation of calibrated solutions. Recalculated Ground Reaction Curve (GRC) and Longitudinal Displacement Profile (LDP) showed that relatively small variations in stress relaxation assumptions significantly affect predicted convergence and calibrated geotechnical parameters. The results demonstrate that reliable estimation of pre-support deformation and stress release is essential for realistic tunnel back analysis and confirm that the integrated FDM–GA framework provides a robust, repeatable tool for geotechnical parameter calibration in NATM tunnel engineering.

نویسندگان

Mohammad-Taghi Hamzaban

Mining Engineering Faculty, Sahand University of Technology, Tabriz, Iran.

Alireza Chehreghan

Mining Engineering Faculty, Sahand University of Technology, Tabriz, Iran.

Roozbeh Geraili Mikola

Lead Associate, Delve Underground, Walnut Creek, CA, USA.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Moreira, N., Miranda, T., Pinheiro, M., Fernandes, P., Dias, ...
  • . Sun, J., Wang, F., Wang, X., & Wu, X. ...
  • . Chang, X., Wang, H., & Zhang, Y. (۲۰۲۳). Back ...
  • . Zhang, C., Chen, Q., Zhou, W., & Huang, X. ...
  • . Pang, Z., Huang, Y., Xie, M., & Liu, Y. ...
  • . Iran Oston Cons. Engs. (۲۰۲۲). The second phase geological ...
  • . Payab Zamzam Cons. Engs. (۲۰۲۳). Instrumentation and convergencemetery reports ...
  • . Boggs, S. (۲۰۱۲). Principles of sedimentology and stratigraphy ...
  • . Bell, F. (۱۹۷۸). The physical and mechanical properties of ...
  • . Howarth, D.F., & Rowlands, J.C. (۱۹۸۶). Development of an ...
  • . Shakoor, A., & Bonelli, R.E. (۱۹۹۱). Relationship between petrographic ...
  • . Shafiei, A. & Dusseault, M. (۲۰۰۸).Geomechanical properties of a ...
  • . Jackson, R., Gorski, B., & Gyenge, M. (۱۹۹۵). Geotechnical ...
  • . Bratton, J.L., & Pratt, H.R. (۱۹۶۸).Two-dimensional finite difference calculations ...
  • . Boyum, B.H. (۱۹۶۱).Subsidence case histories in Michigan mines. in ...
  • . Xiangjun, L., Jian, X., Lixi, L., & Xincai, Y. ...
  • . Li, N., Zhang, S.C., Ma, X.F., Zou, Y.S., Chen, ...
  • . Hoek, E. (۲۰۰۷). Practical rock engineering. ۲۰۰۷. Online. ed. ...
  • . Goodman, R.E. (۱۹۹۱). Introduction to rock mechanics. John Wiley ...
  • . Majdi, A. (۱۹۹۸). Grouting design for Tehran Metro Tunnels ...
  • . Moosavi, M. & Mohammadi Arimi, H. (۲۰۰۳). Stability analysis ...
  • . Fakhimi, A., Salehi, D., & Mojtabai, N. (۲۰۰۴). Numerical ...
  • . Ebtekar, E., Sorush, A. & Yavari, M. (۲۰۰۱). Stability ...
  • . Nouriyan Bidgoli, M. & Shahriyar, K. (۲۰۰۴). A method ...
  • . Potts, D.M., Zdravković, L., Addenbrooke, T., Higgins, K.G., & ...
  • . Boonyarak, T. & Ng, C.W. (۲۰۱۵). Effects of construction ...
  • . Lunardi, P. (۲۰۰۸). Design and construction of tunnels: Analysis ...
  • . Vlachopoulos, N., & Diederichs, M. (۲۰۰۹). Improved longitudinal displacement ...
  • . Panet, M. & Sulem, J. (۲۰۲۲). Convergence-confinement method for ...
  • . Carranza-Torres, C. & Fairhurst, C. (۲۰۰۰). Application of the ...
  • نمایش کامل مراجع