An Instrumented Direct Tensile Testing Framework for Layered Materials: Experimental Validation and ۳D PFC Analysis of Asymmetric Fracture

سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 35

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMAE-17-5_010

تاریخ نمایه سازی: 22 آبان 1405

چکیده مقاله:

Determining the tensile strength of brittle, layered materials, including layered rocks and cracked concrete, is difficult when using commonly adopted indirect loading configurations that do not induce pure tensile conditions. Therefore, obtaining tensile strength through direct experimental quantification is crucial for such materials, particularly when examining crack onset and subsequent crack growth in the vicinity of crack tips. The present research proposes a novel direct tension-based testing framework designed to deliver more reliable strength characterization of layered quasi-brittle materials, while simultaneously enabling a detailed assessment of fracture initiation and propagation mechanisms. The testing apparatus consists of a steel beam with a load converter that serves as both the loading fixture and the load cell. A pre-holed layered sample is securely positioned at the center of the apparatus using a strong metal plate, while strain gauges on both sides capture critical data on the specimen's tensile behavior. Significantly, the apparatus can detect and quantify asymmetric failure within the specimen, offering a detailed understanding of crack formation and failure patterns. The design, calibration protocols, and empirical test results are thoroughly detailed and analyzed. Additionally, this study employs ۳D PFC modeling to clarify the breakage mechanisms in various layer configurations, thereby enhancing the accuracy of tensile strength measurements. The numerical modeling results demonstrate that increasing the thickness of the hard layer leads to a nonlinear increase in the specimen's resistance. Furthermore, at a constant hard layer thickness, increasing the number of hard layers results in a decrease in the model's resistance.

نویسندگان

Vahab Sarfarazi

Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran.

Hadi Haeri

Department of Mining Engineering, Higher Education Complex of Zarand, Shahid Bahonar University of Kerman, Kerman, Iran.

Jinwei Fu

School of Civil Engineering and Transportation, North China University of Water Resources and Electric Power, Zhengzhou, ۴۵۰۰۴۶, China., Email: fujinwei۱۹۸۷@۱۲۶.com

Pejman Kalvandi

Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran.

Mohammad Fatehi Marji

Department of Mine Exploitation Engineering, Faculty of Mining and Metallurgy, Institute of Engineering, Yazd University, Yazd, Iran.

Alireza Shaker

Department of Geology, Faculty of Sciences, Shahid Bahonar University of Kerman, Kerman, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Cho, J., Kim, H., Jeon, S., & Min, K. ...
  • . Bi, J., Du, C., Zhao, Z. Y., Wang, C., ...
  • . Liang, X., Tang, S., Tang, C., Hu, L., & ...
  • . Zhao, C., Liu, J., Xu, D., Zhang, L., Lyu, ...
  • . Fan, W., Zhang, J., Yang, Y., Fang, K., Wu, ...
  • . Lisjak, A., Tatone, B. S. A., Grasselli, G., & ...
  • . Heng, S., Guo, Y., Yang, C., Daemen, J. J. ...
  • . Li, Y., Zhou, H., Zhu, W., Li, S., & ...
  • . Li, Y., Wang, H., Zhu, W., Li, S., & ...
  • . Wang, Y., Li, X., & Zhang, B. (۲۰۱۶). Numerical ...
  • . Wang, Y., Li, X., Hu, R., Ma, C., Zhao, ...
  • . Wang, Y., & Li, C. H. (۲۰۱۷). Investigation of ...
  • . Li, Y., Li, C., Zhang, L., Zhu, W., Li, ...
  • . Li, Y., Zhou, H., Dong, Z., Zhu, W., Li, ...
  • . Wang, Y., Tan, W. H., Liu, D. Q., Hou, ...
  • . Suo, Y., Chen, Z., Rahman, S. S., et al. ...
  • . Li, K., Yin, Z. Y., Han, D., et al. ...
  • . Ren, L., Xie, H. P., Sun, X., Zhang, R., ...
  • . Golewski, G. L. (۲۰۲۳a). Examination of water absorption of ...
  • . Golewski, G. L. (۲۰۲۳b). Assessing of water absorption on ...
  • . Golewski, G. L. (۲۰۲۳c). Effect of coarse aggregate grading ...
  • . Golewski, G. L. (۲۰۲۴). Enhancement fracture behavior of sustainable ...
  • . Broch, E. (۱۹۸۳). Estimation of strength anisotropy using the ...
  • . Al-Harthi, A. A. (۱۹۹۸). Effect of planar structures on ...
  • . Wang, G., Yang, D., Liu, S., et al. (۲۰۲۱). ...
  • . Castro, J., Miranda, M., Olson, M. H., & Justo, ...
  • . Zhang, Y., Zhang, Q.-Y., Zhou, X.-Y., & Xiang, W. ...
  • . Rabat, A., Tomas, R., & Cano, M. (۲۰۲۳). Assessing ...
  • . Pérez-Rey, I., Muñoz-Ibañez, A., González-Fernández, M. A., Muñiz-Menéndez, M., ...
  • . Chenevert, M. E., & Gatlin, C. (۱۹۶۵). Mechanical anisotropies ...
  • . Potyondy, D. O. (۲۰۱۷). Simulating perforation damage with a ...
  • . Potyondy, D. O., & Cundall, P. A. (۲۰۰۴). A ...
  • . Abharian, S., Sarfarazi, V., Rasekh, H., & Behzadinasab, M. ...
  • نمایش کامل مراجع