Influence of joint conditions relative to the incident bar dynamic loading on the fragment size of iron ore
محل انتشار: مجله معدن و محیط زیست، دوره: 17، شماره: 5
سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 35
فایل این مقاله در 28 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-17-5_011
تاریخ نمایه سازی: 22 آبان 1405
چکیده مقاله:
The characteristics of fragment size distribution caused by blasting operations in open-pit mines have a direct impact on the economic performance and productivity of mining companies. In this study, dynamic impact loading tests were carried out using the Split Hopkinson Pressure Bar (SHPB) system under a constant pressure of ۱۲.۵ MPa to investigate the influence of both the edge notch length and its position relative to the incident bar on the size distribution of fragmented iron ore. By analyzing the fragmentation distribution characteristics of specimens subjected to controlled laboratory impact loading, this study focuses on fundamental rock breakage mechanisms relevant to blasting operations in open-pit iron ore mines, where the fragmented material classified into three particle size categories: large, medium, and fine fragments. Based on this classification, the variation in the mass percentage of fragments with respect to notch length and its position relative to the incident bar was investigated. Ultimately, within the context of laboratory-scale fragmentation analysis, an effective range of notch lengths and positions relative to the incident bar was identified for achieving optimal fragmentation. The results revealed that a notch length between ۰.۲ and ۰.۴ and a notch position between L/۲ and ۲L/۳ from the incident bar (where L equals sample length), produced the most favorable fragment size distribution. These findings can help link laboratory-scale fracture behavior to field-scale rock fragmentation considerations and contribute to a broader understanding of breakage processes in mining engineering.
کلیدواژه ها:
نویسندگان
Shadman Mohammadi Bolbanabad
Department of Mining Engineering, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
Masoud Monjezi
Department of Mining Engineering, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
Vahab Sarfarazi
Hamedan university of technology, mining engineering department, Hamedan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :