Numerical Investigation of CO۲ Capture from N۲-Rich Gas Mixtures Using a Zeolite ۱۳X Packed Bed with Aluminum Foam Heat Transfer Enhancement
محل انتشار: مجله پردازش گاز، دوره: 12، شماره: 1
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 11
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_GPJU-12-1_001
تاریخ نمایه سازی: 22 آبان 1405
چکیده مقاله:
A numerical investigation of CO۲ adsorption and desorption in a ۱۳X zeolite packed bed enhanced with aluminum foam for thermal management is presented using a two-dimensional transient model. The rectangular bed (۱۰–۳۰ mm thick) with a ۱۵ mm gas channel is simulated via the finite element method, solving coupled momentum, mass, and energy equations under local thermal equilibrium. Effects of inlet gas velocity, cooling/heating fluid temperatures, and bed thickness on breakthrough, temperature, capacity, desorption, and thermal efficiency are examined with and without foam. Results show that increasing inlet velocity from ۰.۰۰۱ to ۰.۰۱ m/s reduces breakthrough time (defined as Cout/Cin=۰.۰۵) from ~۳۰۰ s to ۳۸ s due to faster saturation. Aluminum foam enhances heat transfer, reducing the time to reach ۲.۶ mol/kg adsorption capacity in a ۳۰ mm bed from ۱۹۹۵ s to ۱۵۴۰ s (۲۳% reduction). During desorption at ۴۷۰ K, foam reduces the time for CO۲ loading to drop from ۲.۷۲ to ۲.۳۸ mol/kg from ۱۶۸۰ s to ۱۴۲۰ s. Higher cooling fluid temperature raises bed temperature and lowers capacity, while higher desorption temperature accelerates regeneration. Thicker beds improve adsorption performance but reduce thermal efficiency due to thermal inertia. Aluminum foam causes a ~۵% reduction in thermal efficiency from added thermal mass. Overall, aluminum foam significantly enhances heat transfer and dynamic adsorption performance, demonstrating the potential of foam-enhanced zeolite beds for compact temperature swing CO۲ capture systems.
کلیدواژه ها:
نویسندگان
Mojtaba Mahdavi Asl
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Mohammad Hojjat
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
Mohsen Gholami
Department of Chemical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran / Department of Chemical Engineering, Vrije Universiteit Brussel, ۱۰۵۰ Brussels, Belgium
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :