Process Modeling and Optimization of Coal Gasification for Enhanced Hydrogen and Syngas Yield in Sponge Iron Production
سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 28
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJHFC-13-3_003
تاریخ نمایه سازی: 22 آبان 1405
چکیده مقاله:
Due to the irregular availability of natural gas, coal has been proposed as an alternative source for the production of synthesis gas in steel plants. This study simulated a coal gasification unit aimed at producing synthesis gas. The developed model was initially validated using available reference data, confirming its reliability and accuracy. Using Tabas coal as feedstock, the gasification process was simulated in Aspen Plus software using an entrained-flow gasifier. Sensitivity analysis was conducted on the type of coal, as well as the water-to-coal and oxygen-to-coal ratios, to identify key factors affecting the gasification process. The key results show that approximately ۲۲ tons per hour of Tabas coal are required to produce ۷۷۰۰۰ Nm۳/h of syngas, sufficient to support the production of ۱۱۰ tons per hour of sponge iron. Process water consumption is around ۰.۳ times the coal input, with a cooling and quenching water-to-coal ratio of approximately ۱.۷, much of which is reused. Significantly, additional water is not required for the water-gas shift reaction due to syngas quenching within the gasifier. The study confirmed that the type of coal and the ratios of water-to-coal and oxygen-to-coal are critical parameters, with high-quality Tabas coal demanding lower amounts of oxygen and water for syngas production compared to lower-grade coals. This research serves as a valuable guide for improving the efficiency and productivity of coal gasification units in the steel industry. Overall, the findings indicate that using coal for synthesis gas production has great potential in meeting energy demands and enhancing productivity in the steel industry.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :