Analytical solutions for Static Analysis of Sandwich Cylindrical Shell containing functionally graded face sheets and functionally graded porosity core based on HSDT theory

سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 33

فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JCAM-57-4_003

تاریخ نمایه سازی: 22 آبان 1405

چکیده مقاله:

In this research, a new four-variable Shear Deformation Theory is utilised to investigate the bending behavior of Imperfect FG sandwich cylindrical shell that are exposed to a load that is distributed evenly. In this theory, the number of unknowns is reduced to four by employing an undefined integral. Furthermore, there is no requirement for any shear correction factor to be included in theory. Furthermore, it is believed that the effective constituent material properties of the top and lower layers of the FG sandwich cylindrical shell fluctuate smoothly and continuously only in the thickness direction. In contrast, the core layer made of porous material. The notion of virtual displacement is utilised to obtain the equations that control equilibrium for simply supported FGSCSs. By applying Navier's method to several different FGSCS schemas, they can derive their respective analytical solutions. A comparison is made between the results obtained and those of previously published research. Within the scope of this investigation, the power law index, side-to-thickness ratio, porosity distribution type and geometric ratio impact on the bending behavior were all taken into consideration.

کلیدواژه ها:

نویسندگان

- -

Laboratory of Eng and Sciences of Advanced Materials (ISMA), Khenchela ۴۰۰۰۰, Algeria

- -

Faculty of Sciences & Technology, Mechanic Eng Department, University Abbes Laghrour, Khenchela ۴۰۰۰۰, Algeria

- -

Laboratory of Eng and Sciences of Advanced Materials (ISMA), Khenchela ۴۰۰۰۰, Algeria

- -

Materials and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department, Sidi Bel Abbes, ۲۲۰۰۰ Algeria

- -

Materials and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department, Sidi Bel Abbes, ۲۲۰۰۰ Algeria

- -

Laboratory of Eng and Sciences of Advanced Materials (ISMA), Khenchela ۴۰۰۰۰, Algeria

- -

Faculty of Sciences & Technology, Mechanic Eng Department, University Abbes Laghrour, Khenchela ۴۰۰۰۰, Algeria

- -

Faculty of Sciences & Technology, Mechanic Eng Department, University Abbes Laghrour, Khenchela ۴۰۰۰۰, Algeria

- -

CIDEM, ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, ۴۳۱, ۴۲۴۹-۰۱۵ Porto, Portugal

- -

Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals, ۳۱۲۶۱ Dhahran, Eastern Province, Saudi Arabia

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H.-T. Thai, S.-E. Kim, A review of theories for the ...
  • M. S. Ismail, J. Mahmud, O. Ifayefunmi, J. Purbolaksono, Buckling ...
  • M. Kholdi, G. Rahimi, A. Loghman, H. Ashrafi, M. Arefi, ...
  • E. Sobhani, Vibrational characteristics of fastening of a spherical shell ...
  • E. Sobhani, A. R. Masoodi, A. R. Ahmadi-Pari, Circumferential vibration ...
  • S. Wang, S. Lin, A novelly universal theory: Toward accurately ...
  • R. K. Yadav, S. S. Gupta, Inextensional vibrations of thin ...
  • Free vibration, Buckling and Bending investigation of bidirectional FG curved sandwich beams [مقاله ژورنالی]
  • B. M. Shinde, A. S. Sayyad, Static flexural analysis of ...
  • M. Dorduncu, Flexure analysis of functionally graded plates using {۲, ...
  • C.-D. Chen, B.-F. Huang, A novel higher-order refined zigzag theory ...
  • A. Tımeslı, Analytical modeling of buckling behavior of porous FGM ...
  • K. Foroutan, L. Dai, Static and dynamic thermal post-buckling analysis ...
  • H. N. Nguyen, T. T. Hong, P. V. Vinh, N. ...
  • Magneto-electro vibration analysis of a moderately thick double-curved sandwich panel with porous core and GPLRC using FSDT [مقاله ژورنالی]
  • A. F. Mota, M. A. R. Loja, J. I. Barbosa, ...
  • J. Zhao, Q. Wang, X. Deng, K. Choe, R. Zhong, ...
  • A. Rachid, D. Ouinas, A. Lousdad, F. Z. Zaoui, B. ...
  • H. Chen, A. Wang, Y. Hao, W. Zhang, Free vibration ...
  • A. Tamrabet, C. Mourad, N. Ali Alselami, A. Menasria, B. ...
  • K. D. Duong, D. N. Mai, P. V. Minh, T. ...
  • A novel quasi-۳D refined HSDT for static bending analysis of porous functionally graded Plates [مقاله ژورنالی]
  • H. Benachi, A. Menasria, A. Bouhadra, S. Refrafi, M. Baazouzi, ...
  • M. Chitour, S. Benguediab, A. Bouhadra, F. Bourada, M. Benguediab, ...
  • W. Fang, T. Yu, T. Q. Bui, Analysis of thick ...
  • K. Gao, R. Li, J. Yang, Dynamic characteristics of functionally ...
  • D. Chen, J. Yang, S. Kitipornchai, Elastic buckling and static ...
  • N.-D. Nguyen, T.-N. Nguyen, T.-K. Nguyen, T. P. Vo, A ...
  • C. Mourad, B. Rebai, K. Mansouri, F. Khadraoui, A. Berkia, ...
  • N. Himeur, A. Menasria, A. Bouhadra, C. Mourad, S. Refrafi, ...
  • Y. Lee, X. Zhao, K. M. Liew, Thermoelastic analysis of ...
  • Q.-H. Pham, P.-C. Nguyen, V. K. Tran, T. Nguyen-Thoi, Isogeometric ...
  • A. Menasria, R. Slimani, A. Bouhadra, S. Refrafi, M. Chitour, ...
  • B. M. Shinde, A. S. Sayyad, A new higher order ...
  • A. S. Sayyad, Y. M. Ghugal, T. Kant, Higher-order static ...
  • S. Benounas, M.-O. Belarbi, V. P. Van, A. A. Daikh, ...
  • X. Zhao, Y. Lee, K. M. Liew, Thermoelastic and vibration ...
  • E. Viola, L. Rossetti, N. Fantuzzi, Numerical investigation of functionally ...
  • A. A. Belhachemi, D. Ouinas, M. R. Ghezzar, F. Zohra ...
  • نمایش کامل مراجع