Thermal Behavior and Flow Characteristics inside a Square Cavity with Variable Horizontal Obstacles
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 57، شماره: 4
سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 30
فایل این مقاله در 26 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-57-4_008
تاریخ نمایه سازی: 22 آبان 1405
چکیده مقاله:
This study presents a comprehensive numerical investigation of unsteady natural convection, heat transfer, and entropy generation in a water-filled square cavity containing a centrally positioned horizontal adiabatic obstacle. The problem is relevant to buoyancy-driven transport in enclosed thermal environments, where internal obstructions can modify flow organization, thermal stratification, irreversibility, and overall energy performance. The enclosure is heated uniformly from the bottom, cooled from the top, and insulated along the vertical sidewalls. Two obstacle lengths, corresponding to ۲۵% and ۵۰% of the cavity width, are examined to clarify how internal blockage affects convective transport, flow stability, transition behaviour, and thermodynamic efficiency. The governing equations are solved using the finite volume method for water with a fixed Prandtl number ۷.۰, over a Rayleigh number range of ۱۰^۲≤Ra≤۱۰^۶. The flow and thermal responses are analysed using streamlines, isotherms, temperature time series, phase-space trajectories, power spectra, the largest Lyapunov exponent, entropy generation, Bejan number, and the ecological coefficient of thermal performance. The results show that obstacle size has a strong influence on both flow stability and thermal performance. At high Rayleigh numbers, the influence of the ۲۵% obstacle becomes relatively weak, producing only about ۱.۵% reduction in heat transfer compared with the unobstructed cavity, whereas the ۵۰% obstacle causes a more substantial reduction of approximately ۹.۵%. The cavity with the ۵۰% obstacle generates slightly higher entropy than the ۲۵% obstacle case at the largest Rayleigh number. For all cases, the average Bejan number remains greater than ۰.۵۰, indicating that heat-transfer irreversibility is the dominant source of total entropy generation. The ۲۵% obstacle case achieves the highest ecological coefficient of thermal performance, with a maximum value of ۰.۱۱۰۳, compared with ۰.۰۹۶۸ for the ۵۰% obstacle and ۰.۱۰۲۳ for the unobstructed cavity. These findings demonstrate that a moderate internal obstacle can provide a favourable balance between heat-transfer enhancement and entropy generation, leading to improved thermodynamic performance in buoyancy-driven enclosed flows.
کلیدواژه ها:
نویسندگان
- -
Department of Mathematics, Jagannath University, Dhaka ۱۱۰۰, Bangladesh
- -
Department of Computer Science and Engineering, Z. H. Sikder University of Science and Technology, Shariatpur ۸۰۲۴, Bangladesh
- -
Department of Mathematics, Jagannath University, Dhaka ۱۱۰۰, Bangladesh
- -
School of Electrical, Mechanical and Biomedical Engineering, University of Technology Sydney, Ultimo, North South Wales, ۲۰۰۷, Australia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :