بررسی عددی رفتار مکانیکی و عملکرد جذب انرژی ساختارهای آگزتیک و کلاسیک تقویت شده تحت بارگذاری فشاری شبه استاتیک

سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 33

فایل این مقاله در 26 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMSS-2-3_006

تاریخ نمایه سازی: 21 آبان 1405

چکیده مقاله:

ساختارهای سلولی آگزتیک تقویت شده به دلیل ضریب پواسون منفی، تغییرشکل جانبی همگرا و قابلیت مطلوب در توزیع یکنواخت تنش، از گزینه های کارآمد در سامانه های جاذب انرژی و حفاظت ضربه ای به شمار می روند. در این پژوهش، رفتار مکانیکی و راندمان جذب انرژی پنج پیکربندی تقویت شده کلاسیک شامل ساختارهای «ستاره ای»، «لانه زنبوری»، «درون سو»، «سرنیزه ای» و «هیتلری» تحت بارگذاری فشاری شبه استاتیک به روش اجزای محدود مورد بررسی و مقایسه قرار گرفت. نتایج نشان داد که الگوی مهاربندی داخلی و هندسه اتصالات، اثر مستقیمی بر جرم، نیروی خردشدگی بیشینه اولیه (PCF)، نیروی خردشدگی میانگین (MCF) و انرژی ویژه جذب شده (SEA) دارد. ساختار تقویت شده ستاره ای با جرم ۵/۸۵ گرم، بالاترین انرژی ویژه جذب شده معادل ۴۷/۱ کیلوژول بر کیلوگرم، نیروی بیشینه کنترل شده ۵۱۲۶/۲۹ نیوتن و بیشینه راندمان جذب انرژی ۰/۴۸ در جابه جایی ۱۸ میلی متر را ثبت کرد و به عنوان پیکربندی بهینه با بیشترین کارایی وزنی شناخته شد. در مقابل، ساختار تقویت شده لانه زنبوری با وجود ثبت راندمان لحظه ای اولیه ۰/۹۴، به دلیل ناپایداری لایه ای با افت شدید راندمان مواجه گردید و ساختار درون سو با جرم ۱۷/۰۷ گرم و بالاترین نیروی بیشینه (۸۲۵۲/۲۲ نیوتن)، راندمان ۰/۳۴ را ارائه داد. تحلیل مکانیزم های تغییرشکل نشان داد که تشکیل متوالی لولاهای پلاستیکی در بازوهای ساختار ستاره ای ضمن مهار تمرکز تنش، فاز فلات پایدار (۵۰۰۰ تا ۵۵۰۰ نیوتن) و فروریزش یکنواخت را تا پیش از شروع تراکم نهایی فراهم می سازد.

کلیدواژه ها:

نویسندگان

عرفان طاهرخانی

فارغ التحصیل دانشکده مهندس رشته مکانیک گرایش طراحی کاربردی دانشگاه بو علی سینا،همدان، ایران

محمد رضا پارساییان

دانشجو دکتری مهندسی مکانیک گرایش طراحی کاربردی، دانشگاه بو علی سینا، همدان، ایران

مهدی مردانی

دانشجو دکتری مهندسی مکانیک گرایش طراحی کاربردی، دانشگاه بو علی سینا، همدان، ایران

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • K. E. Evans, “Auxetic polymers: a new range of materials,” ...
  • A. J. C. B. de Saint-Venant, Résumé des leçons sur ...
  • G. N. Greaves, “Poisson’s ratio over two centuries: challenging hypotheses,” ...
  • R. Critchley et al., “A review of the manufacture, mechanical ...
  • K. E. Evans and A. Alderson, “Auxetic materials: functional materials ...
  • D. J. Gunton and G. A. Saunders, “The Young’s modulus ...
  • J. F. V. Vincent, C. Lees, and J. E. Hillerton, ...
  • J. F. V. Vincent, G. Jeronimidis, B. H. V. Topping, ...
  • J. L. Williams and J. L. Lewis, “Properties and an ...
  • Z. Wang and H. Hu, “Auxetic materials and their potential ...
  • K. L. Alderson et al., “Novel fabrication route for auxetic ...
  • K. L. Alderson et al., “How to make auxetic fibre ...
  • Z. Wang, A. Zulifqar, H. Hu, and H. Kong, “Auxetic ...
  • L. Mirante, Auxetic Structures: toward Bending-Active Architectural Applications, ۲۰۱۵, pp. ...
  • F. Scarpa, L. G. Ciffo, and J. R. Yates, “Dynamic ...
  • F. Scarpa, J. A. Giacomin, A. Bezazi, and W. A. ...
  • F. Scarpa and F. C. Smith, “Passive and MR fluid-coated ...
  • Y. Prawoto, “Seeing auxetic materials from the mechanics point of ...
  • J. Choi and R. Lakes, “Fracture toughness of re-entrant foam ...
  • F. Scarpa and P. J. Tomlin, “On the transverse shear ...
  • N. Chan and K. E. Evans, “The mechanical properties of ...
  • O. Duncan et al., “Review of auxetic materials for sports ...
  • T. Allen et al., “Auxetic foams for sport safety applications,” ...
  • K. E. Evans and K. L. Alderson, “Auxetic materials: the ...
  • S. Pichandi, Development of Composite Auxetic Structures for Civil Engineering ...
  • T. Zahra and M. Dhanasekar, “Characterisation of cementitious polymer mortar–auxetic ...
  • G. Tzortzinis, A. Gross, and S. Gerasimidis, “Auxetic boosting of ...
  • R. Zhong et al., “Mechanical properties of concrete composites with ...
  • C. Luo et al., “A novel concrete-filled auxetic tube composite ...
  • Y. Xu et al., “Cementitious cellular composites with auxetic behavior,” ...
  • L. J. Gibson, M. F. Ashby, G. S. Schajer, and ...
  • G. Imbalzano, P. Tran, T. D. Ngo, and P. V. ...
  • G. Imbalzano et al., “Blast resistance of auxetic and honeycomb ...
  • L. L. Hu, M. Z. Zhou, and H. Deng, “Dynamic ...
  • H. Al-Rifaie and W. Sumelka, “The development of a new ...
  • X. Zhang et al., “Numerical investigation on dynamic crushing behavior ...
  • I. G. Masters and K. E. Evans, “Models for the ...
  • L. Yang, O. Harrysson, H. West, and D. Cormier, “Mechanical ...
  • I. E. Berinskii, “Elastic networks to model auxetic properties of ...
  • N. Novak, M. Vesenjak, and Z. Ren, “Computational simulation and ...
  • C. Wang et al., “Multi-objective explosion-proof performance optimization of a ...
  • Y. Wang et al., “Analysis and parametric optimization of a ...
  • U. D. Larsen, O. Sigmund, and S. Bouwstra, “Design and ...
  • X. Zhao et al., “Dynamic crushing of double-arrowed auxetic structure ...
  • Q. Gao et al., “Crashworthiness analysis of double-arrowed auxetic structure ...
  • A. Remennikov et al., “Development and performance evaluation of large-scale ...
  • E. Taherkhani, M.R. Parsaiyan, M. Mardani, Analysis of the effect ...
  • Taherkhani, E., & Paykar, H. “Investigation of Geometry and Energy ...
  • M. Seetoh et al., “Extremely stiff and lightweight auxetic metamaterial ...
  • Najafi M, Ahmadi H, Liaghat GH. Experimental and numerical investigation ...
  • N. A. Bhatti and M. A. Wahab, “Finite element analysis ...
  • C. W. Isaac and C. Ezekwem, “A review of the ...
  • نمایش کامل مراجع