Impact of Temperature Increase on BRU Catalysts and the Decline in Reactivity in Refineries
سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 32
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJCCE-45-11_008
تاریخ نمایه سازی: 21 آبان 1405
چکیده مقاله:
Catalyst efficiency and lifetime are critical to the proper operation of the BRU (Butane Reformer Unit) in refineries. Changes in operating conditions and higher process temperatures can cause the catalyst to lose activity over time. This can reduce reactivity and production efficiency while also increasing operating costs. Although numerous studies have examined BRU catalysts under normal conditions, few have quantitatively evaluated temperature-induced deactivation. This study aims to examine how increasing temperature affects the activity of BRU catalysts, understand the main causes of catalyst deactivation, and provide useful predictions that can help improve refinery operation and catalyst management. Data from different BRU units were collected, including various parameters such as temperature, feed composition, pressure, and duration of catalyst operation. The spent catalysts were analyzed by TGA (thermogravimetric analysis), SEM (scanning electron microscopy), and elemental analysis in relation to coking, sintering, and poisoning. Kinetic models for activity loss were created for different temperatures, and regression analysis helped determine the factors affecting the deactivation rate of the catalysts. The research suggests that when the average temperature of the bed exceeds ۵۲۰ °C, an activity loss of ۱۵–۲۰% occurs, with the most significant contribution coming from coking (۶۰% of the activity loss), followed by sintering (۳۰%) and minor contributions from metal poisoning. The kinetic modeling results show that using the catalyst under high-temperature conditions for a long time can cause a decrease of up to ۲۵% in its life. Managing the temperature is essential in the operation of BRU catalysts because it has a direct effect on their rate of deactivation. The method described combines data-driven and kinetic principles for measuring temperature effects, giving a basis for the improvement of catalyst operations and design.
کلیدواژه ها:
Catalyst deactivation ، Butane Recovery Unit (BRU) ، temperature effects ، Sintering and Coking ، Refinery efficiency
نویسندگان
- -
Department of Chemical Engineering, Al-Huson University College, Al-Balqa Applied University. PO Box ۵۰, Al-Huson ۲۱۵۱۰, Irbid, JORDAN
- -
Department of Chemical Engineering, Al-Huson University College, Al-Balqa Applied University. PO Box ۵۰, Al-Huson ۲۱۵۱۰, Irbid, JORDAN
- -
Department of Chemical Engineering, Jordan University of Science and Technology, Irbid, JORDAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :