Finite Element Analysis of Screw Configuration Effects on Stress Distribution after Bilateral Sagittal Split Ramus Osteotomy
محل انتشار: مجله علوم دارویی و شیمی، دوره: 9، شماره: 7
سال انتشار: 1405
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 64
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMCH-9-7_006
تاریخ نمایه سازی: 14 آبان 1405
چکیده مقاله:
This study aimed to compare different titanium screw configurations after bilateral sagittal split ramus osteotomy using finite element analysis and to identify the configuration that provides the most favorable stress distribution and primary stability under simulated occlusal forces. The main contribution is a focused comparison of ten screw-only arrangements in the same complete mandibular model under identical loading and boundary conditions. In this experimental laboratory study, a three-dimensional model of the human mandible was reconstructed from CT scan data. The model was prepared in CATIA and analyzed in ANSYS. Bilateral sagittal split ramus osteotomy was simulated, and different titanium screw configurations were applied to the osteotomized segments. Occlusal loads of ۷۵, ۱۳۵ and ۶۰۰ N were applied to the incisors, premolars, and first and second molars, respectively. The reported outcome was maximum von Mises stress in cortical bone, expressed in MPa, and the values were used for comparative ranking rather than as a direct clinical failure threshold. The resulting stress distribution patterns were then evaluated using finite element analysis. However, the amount of stress transferred to the bone varied among the screw configurations. The single-screw method placed near the inferior border of the mandible produced the highest stress values. In contrast, the four-screw configuration arranged in a square pattern produced the lowest stress values under all loading conditions. Within the limits of a linear elastic finite element model, the findings suggest that screw arrangement plays a crucial role in stress distribution after bilateral sagittal split ramus osteotomy. Among the evaluated methods, the four-screw square configuration provided the most favorable stress distribution, whereas the single-screw method near the inferior border of the mandible was the least suitable option for achieving primary stability.
کلیدواژه ها:
Screw ، Stress ، finite element analysis ، Bilateral sagittal split ramus osteotomy ، Internal Rigid Fixation
نویسندگان
Mahsa Yousefi
School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :