EFFESTS IF PRESET CLAMPING FORCE ON STRENGTH OF BUTT ND: yAG LASER WELDED JOINT

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,060

فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME13_671

تاریخ نمایه سازی: 21 اسفند 1385

چکیده مقاله:

The clamping force for butt weld joint during laser welding process was measured. The preset clamping force changes during welding process due to the force induced by thermal effect on small heat affected joint. The thermal expansion, contraction during cooling period, and slight reduction in width of workpieces influence the variation of clamping force across the weld joint. Tensile tests revealed that the reset clamping force increases the weld joint breaking force in general and particularly for an optimum clamping force.

نویسندگان

Patankar

School of Aerospace, Mechanical and Manufacturing Engineering RMIT University, Australia

Mahdavian

School of Aerospace, Mechanical and Manufacturing Engineering RMIT University, Australia

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Zhou Bai Hua, Mahdavian, S.M.، ، Experimental and theoretical analyses ...
  • Grigoryants Alexander. G.، Basics of laser material Processing translated from ...
  • Lmhoff R., ، Laser beam welding in car body marking ...
  • Duhamel R. F. and Banas C. M., "Laser Welding of ...
  • Belforte David A, "Why Doesn't Industry Use More Lasers?" Lasers ...
  • Fraunhofer, USA, «Center for Laser Technology', Retrieved on June 15, ...
  • Welded Tailorء، , (1999) 7- Auto/Steel Partnership Blanks: The Identification ...
  • Ahmetoglu M.A., Deep drawing of round cups from tailor- welded ...
  • Chan S.M, Tailor- welded blanks of different thickness ratios effects ...
  • _ Abdullah K., Tensile testing for weld deformation properties in ...
  • " Annual (International) Mechanical Engineering Conference - May 2005 Isfahan ...
  • نمایش کامل مراجع