Design and Implementation A novel Low Power Consumption Lighting System

In this paper we present a way to reduce the standby power consumption of a PIR-sensor-based lighting device. Generally although a PIR-sensor-based lighting device will turn on when motion is detected, and will turn off when the motion disappears, the device still consumes 1-3 W power when the lamp is off. In our design the device consumes 0.007 W when the light is off, and is not only easy to set up but also inexpensive. Our circuit supplies the lamp with power when motion is detected; when the motion disappears it turns the lamp off, and the electric power is shut off in order to reduce the standby power. We use an MCU which receives signals from a PIR sensor which detects any individual approaching the device. The MCU controls the SSR On/Off when used as a lighting switch for shutting off the standby power. The MCU monitoring program provides automatic detection of any individual by means of the PIR sensor. The MCU has internal modules to simplify the hardware circuit design. The circuit component count, cost and power consumption are low.

کلیدواژه ها:

PIR sensor based Lighting Device ، Standby Power ، PIR ، Power Consumption