Simulation and determination of residual stress in tubes produced by duringPTCAP process
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 716
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH02_148
تاریخ نمایه سازی: 21 تیر 1393
چکیده مقاله:
Parallel tubular channel angular pressing (PTCAP) is a novel severe plastic deformation (SPD) technique for producing ultra-fine grained (UFG) metallic tubes. The objective of the present work is to determine the residual stresses in PTCAP processed tubes using an finite element modeling (FEM) developed in ABAQUS software. The results have shown that an increase in the number of PTCAP pass would lead to a decrease in residual stresses that attributed to the low stress gradients along the thickness and length of the PTCAP processed tubes. Comparison of the residual stress values obtained from the FEM with those from experimental hole-drilling technique have shown good agreement of the stress values, giving the validity to numerical analysis for stress evaluations in the PTCAP process.
کلیدواژه ها:
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :