Solar Selective Surface on Aluminum
محل انتشار: سومین همایش بهینه سازی مصرف سوخت در ساختمان
سال انتشار: 1382
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,509
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CECB03_176
تاریخ نمایه سازی: 19 آبان 1384
چکیده مقاله:
Selective surface is used for the utilization of solar energy by photothermal devices. For this purpose spectrally solar selective surfaces on aluminum substrate were prepared by dc anodization in phosphoric acid solution solution(for enlarging pores) followed by A.C. Voltage coloring treatment in a concentrated metal sulphate solution. The optical performances, which are characterized by a high absorbtivity((α 0.9) in the visible and near infrared regions of the spectrum (0.38-2 microns) and a low emissivity (ε 0.2) for radiation of longer wavelength (greater than 6. microns) of these surfaces were studied. PIXE, RBS and Atomic Absorption Analysis were also done and measured. Effect of deposition conditions like anodizing voltage, coloring voltage, bath temperature, coloring time and concentration of Nickel sulphate on spectral selectivity is discussed.
کلیدواژه ها:
نویسندگان
M. Daryabegy
Center for Renewable Energy Research and Application –Atomic Energy Organization of Iran
M.Khaladji
Center for Renewable Energy Research and Application –Atomic Energy Organization of Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :