Correction of structure geometry design of IRAN-LNG Breakwater based on physical modeling results
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 938
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICOPMAS09_147
تاریخ نمایه سازی: 24 خرداد 1393
چکیده مقاله:
In this paper the physical modeling investigations on IRAN-LNG main breakwater sections which resulted to correction of the design of toe berm geometry and weight range are presented. Two types of breakwater section with only difference in toe berm part were tested in order to finding out and choosing more stable toe berm. The geometrical scale factor of 1:35 was selected. Three wave conditions as yearly, 50 years and 100 years return periods with three water levels have been considered. Totally 34 tests were performed in order to carry out the stability of Armour layer Xbloc® units and toe berm stabilityand also wave run-up heights and Overtopping rates in SCWMRI laboratory. Results have been presented by profiles, photographs and related values
کلیدواژه ها:
نویسندگان
peyman Aghtouman
Research Scientist SCWMRI
Seyed Mohammad Hosseini Bandarabadi
General Director DNP Consulting Engineer
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :