Investigation of electrokinetic mixing in 3D non-homogenous microchannels

A numerical study of 3D electrokinetic flows through micromixers was performed. The micromixers considered here consisted of heterogeneousrectangular microchannels with prescribed patterns of zeta-potential at theirwalls. Numerical simulation of electroosmotic flows within heterogeneouschannels requires solution of the Navier-Stokes, Ernest-Plank and species concentration equations. It is known that a 3D solution of these equations iscomputationally very intensive. Therefore, the well-known Helmholtz- Smoluchowski model is often used in numerical simulation of electroosmoticflows. According to 2D studies on electrokinetic mixing inside heterogeneous channels, existence of vortices within the flow field always increases mixing performance. Hence, it may be expected that similar observations pertain to mixing in 3D flows as well. However, investigationson 3D micromixers identified situations in which existence of vortices had little or no significant benefit to the mixing performance. Findings of thepresent work indicated degree of flow asymmetry as a key parameter for the mixing performance. Since 3D flows are more capable of developingasymmetrical flow patterns, they are expected to have better mixing performance than their 2D counterparts. The results presented here fordifferent 3D cases showed that mixing performance could be improved significantly depending on the alignment of vortex plane relative to themixing interface of the fluids. These observations confirmed that 2D simulations of mixing could not fully explain behavior of passive micromixers.

کلیدواژه ها:

Mixing ، Electroosmotic ، Helmholtz-Smoluchowski model ، Non-homogeneous