Experimental assessment of the air flow induced vibration of a single cylinder with a cantilever beam

The focus on different energy harvesting methods has led to various studies on the mechanism of flow-induced vibration phenomena, including vortex-induced vibration, galloping, and wake-galloping. In this study, an experimental investigation on flow around a cylinder with an elastic cantilever beam has been conducted to develop new energy harvesting devices based on its dynamic behavior. Therefore, the basic principles for the design of a high resolution open-circuit subsonic wind tunnel were systematically studied and a specific small scale wind tunnel was constructed based on the requirements. The test chamber cross section for the designed wind tunnel is square with a side length of ۵۰ centimeters which can be used for investigation of different micro wind turbines performance up to velocity of ۸ m/s with resolution of less than ۰.۱ m/s. The vibration of two prototype micro-turbines in the presence of obstacles and without obstacles has been studied in different Reynolds numbers. The results show that a circular cylinder oscillates with larger amplitude in the VIV range in comparison to the square cylinder, however, when galloping starts by increasing Reynolds number, the oscillation amplitude of the square cylinder severely increases. The experimental findings show that the presence of an obstacle in upstream of the flow considerably increases the amplitude of oscillation, however, does not have a meaningful effect on the vibration frequency. Also, results indicate that the vibration amplitude of the bluff body in the wake-galloping phenomenon for the square obstacle is greater in comparison to the circular obstacle.

کلیدواژه ها:

Micro Wind Turbine ، Vortex-induced vibration ، Galloping ، Wake-galloping ، Low Speed Wind Tunnel