Influence of mold temperature and annealing on the microstructure and mechanical properties of ESO-plasticized PP/CL composites

Composites of polypropylene (PP) and calcium lactate (CL) with a constant weight percentage of ۶۰% and ۴۰%, respectively, were compounded with ۳, ۵ and ۷ phr of epoxidized soybean oil (ESO) plasticizer using an internal mixer. The testing samples were prepared using an injection molding technique. The effects of the mold temperature and annealing treatment on the morphological and mechanical properties of PP-based composites using polarized optical microscopy (POM), differential scanning calorimetry (DSC), universal testing machines (UTM), and impact tester were performed. The results showed a remarkable increase in the elongation-at-break and impact strength, but a noticeable decrease in tensile strength and stiffness with increasing ESO contents. The experimental results also indicated that the higher mold temperature significantly improved the tensile strength and stiffness of samples due to an increase in spherulite size for neat PP, PP/CL composite and PP/CL composite with ۳ phr of ESO. Additionally, annealing treatment enhanced the tensile and impact strengths of both neat PP and PP/CL composite, which was attributed to the increase in the crystal perfection and degree of crystallinity. These findings suggested that mechanical improvements using high mold temperature and annealing treatment were confined to the incorporation of an ESO plasticizer. The resulting performance of the plasticized PP composites after thermal treatment was described by two possibilities: the loss in the adhesion between the components and the migration of plasticizer.

کلیدواژه ها:

Polyolefins ، structure-properties relations ، crystallization ، injection molding ، polymer-matrix composite