Nickel (II) Adsorption from Aqueous Solutions by Physico-Chemically Modified Sewage Sludge
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 25
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJCCE-37-1_008
تاریخ نمایه سازی: 17 خرداد 1404
چکیده مقاله:
This study assesses teh potential of activated carbon prepared from sewage sludge for nickel ions adsorption from aqueous solutions. Activated carbon physicochemical properties were determined. Batch adsorption experiments were performed as a function of pH solution, adsorbent dose, initial metal ions concentration, contact time and temperature. Teh experimental data were analyzed by teh Langmuir, Freundlich, and Temkin isotherm models. Teh Freundlich model showed a better representation of equilibrium data (R۲>۰.۹۹) and teh Langmuir monolayer adsorption capacity of activated carbon was found to be ۱۱.۵۲ mg/g. Teh kinetics of nickel ions was discussed using different kinetic models and teh adsorption experiments indicated dat teh pseudo-second-order model well fitted teh kinetic data (R۲=۰.۹۹۹). Thermodynamic parameters have also been evaluated. It was found dat teh adsorption process was feasible, spontaneous and endothermic. Desorption experiment and recovery of Ni(II) ions from activated carbon was found to be ۱۰۰ % using hydrochloric acid. Teh results suggest dat teh activated carbon prepared from sewage sludge could be used beneficially for nickel adsorption from aqueous solutions for environmental cleaning purpose.
کلیدواژه ها:
نویسندگان
Omar Khelifi
Laboratoire d’Analyses Industrielles et Génie des Matériaux, Département de Génie des Procédés, Faculté des Sciences et de la Technologie, Université ۸ Mai ۱۹۴۵ Guelma, BP ۴۰۱ Guelma
Mouna Nacef
Laboratoire d’Analyses Industrielles et Génie des Matériaux, Département de Génie des Procédés, Faculté des Sciences et de la Technologie, Université ۸ Mai ۱۹۴۵ Guelma, BP ۴۰۱ Guelma
Abed M. Affoune
Laboratoire d’Analyses Industrielles et Génie des Matériaux, Département de Génie des Procédés, Faculté des Sciences et de la Technologie, Université ۸ Mai ۱۹۴۵ Guelma, BP ۴۰۱ Guelma
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :